Uniden BC246T - Manual (Page 84)

84
Searching and Storing
Selecting a System
To store frequencies or talk group ID’s you find during
Auto Store, you must first select a system where the
frequencies or talk group ID’s will be stored.
1. Press then turn the scroll control until Search
For ... appears. Then press E. One of the search
feature options appear.
2. Turn the scroll control until Search and Store
appears, then press E to select it.
3. Turn the scroll control until the system where you
want to store the frequencies or talk group ID’s
appears, then press E to select it.
If no systems are programmed, or all systems are
locked out, No System Stored appears.
Storing a Conventional System
You can store frequencies into the system you selected in
“Selecting a System”. Otherwise, the scanner stores
frequencies in a new group it creates.
1. Follow Steps 1-3 under “Selecting a System”.
A search option appears.
2. Turn the scroll control until the type of search you
want appears, then press E to select it. A search
band appears.
If all systems are locked out, All Locked! appears and
the scanner does not store any frequencies.
When you select a search range, the scanner looks for
active frequencies within that range and Search and
Store
appears on the display’s lower line and the system
name and search range name appear on the display’s
upper line. When the scanner finds an active transmis-
sion, it checks to see if the frequency has already been
stored in the system. If the frequency has been stored,
the scanner continues to search. If the frequency has not
been stored, it stores the frequency into a group named
Menu