Setting the edacs id format (edacs systems only), Setting control-channel only (motorola sys, Setting the edacs id format (edacs systems – Uniden BC246T User Manual
Page 69: Setting the edacs id format, Edacs systems only), Setting control-channel only, Motorola systems only), Programming/editing optional settings
69
Programming/Editing Optional Settings
Setting the EDACS ID Format
(EDACS Systems Only)
program system
E
Select the system
E
Edit Sys Option
E
EDCS ID Format
E
EDACS talk group ID's are commonly provided in one of two
formats: AFS and Decimal. This setting determines how
you enter EDACS ID's and how the scanner displays them.
AFS Format
- the scanner uses AFS format for talk group ID's
Decimal Format
- the scanner uses decimal format for
talkgroup ID's
Notes:
• The scanner defaults to AFS (agency, fleet, subfleet)
format - the format used in most EDACS systems.
• See “EDACS Trunking” on Page 25 for more
information about the AFS format.
Setting Control-Channel Only
(Motorola Systems Only)
program system
E
Select the system
E
Edit Sys Option
E
Set C
-CH Only
E
This setting determines the frequencies you need to enter
for Motorola systems. Select your setting, then press E.
Off
- you must enter all voice and control channel
frequencies.
On
- you only need to enter control channel frequencies.
Note: The scanner defaults to Off.
Menu
Menu