Uniden UDC-7M - Manual (Page 102)

English
96
CHECKING THE REMAINING BATTERY CHARGE
When using the battery pack, the remaining battery pack charge can be
checked on the monitor. Make sure to check this indicator before capturing an
image. For an indication of the possible length of time for battery pack
operation, see page 130.
1
Press the on/off button to turn the
camera on.
h The battery pack remaining charge
indicator appears in the lower right
corner of the monitor.
h Due to the battery pack
characteristics, when the ambient
temperature is low,
may
appear early for an incorrect
indication of the remaining charge.
Also, depending on the conditions
of use of the camera or the ambient
conditions (temperature, etc.), the
indicated remaining charge may
change. Therefore, this indication
can only be used as a general
approximation of the remaining
charge.
Battery pack
remaining
charge indicator
Battery remaining charge
No indication, or
Approx. full.
(
appears only in certain operation
modes.)
Power is low.
It will soon be impossible to capture or play
back images.
If this icon flashes when the shutter button
is pressed, images cannot be captured.
Recharge the battery pack.
6
Battery pack remaining
charge indicator