Uniden UDC-7M - Manual (Page 37)

31
English
CAPTURING AND PLAYING BACK STILL IMAGES
4
Release your finger from the shutter button.
h The captured image is recorded.
HINT
What is focus lock?
i When the shutter button is pressed halfway, the camera focuses on the subject, and
as long as the shutter button is kept pressed halfway, the focus is fixed (locked) at
the same distance. This is called “focus lock”. After focusing on the subject, you can
then reorient the camera while keeping the shutter button pressed halfway to
compose the picture you like.
When the focus mode (page 58) is set to the 9-point focus mode B...
i A target mark & on the monitor shows the area the camera is focusing on.
i The camera automatically determines the
correct focus by measuring from 9 different
focus points within the shooting area. If the
target mark is at a position that is different
from the point you wish to focus on, you
can refocus, for example, by changing the
shooting angle.
i The large target mark appears when the
camera focuses on a wide area in the
center of the screen.
About the focus indicator
i A green focus indicator appears when the
subject is successfully focused, or a red
focus indicator when the camera was not
able to focus the subject.
The shutter speed and aperture are displayed
i The shutter speed and aperture settings
are also displayed on the monitor. You can
use them as a reference when shooting.
If the motion alert icon appears...
i During still image shooting, if the shutter
speed is slow and the possibility that the
image may be blurred due to camera
shake becomes high, the motion alert icon
may appear on the monitor. In this case,
use a tripod to stabilize the camera when
shooting, or set the flash operation mode
to automatic (page 47).
i When shooting with the fireworks ^
scene function, the motion alert icon
always appears, but this is normal.
F3.1
1/40
Shutter speed
Aperture
Target mark
Focus indicator
1/4
F3.1
Motion alert icon