Uniden UDC-7M - Manual (Page 52)

English
46
USING THE ZOOM
Your camera has two zoom functions: optical zoom and digital zoom.
1
Set the camera to the shooting
mode (page 26), and point the
camera lens at the subject.
2
Press the zoom switch to
compose the desired image.
[T]: Zoom in on the subject.
[W]: Zoom out.
h When the zoom switch is
pressed, the zoom bar appears
on the monitor.
h When the optical zoom factor is
at maximum, zooming stops
temporarily. When [T] on the
zoom switch is pressed again,
the mode changes to the digital
zoom mode and zooming
continues.
3
Take the picture.
HINT
Can’t access the digital zoom?
i The digital zoom cannot be used when the face chaser r scene function
is active, or the focus mode is set to AF seeker p.
Can’t access the optical zoom?
i When the focus range is set to pan o or during video clip recording, the
optical zoom cannot be used.
Zoom switch [W]/[T]
Zoom bar
Monitor
Pointer
When both optical
and digital zoom
are enabled
Digital zoom (yellow)
Optical zoom
When optical zoom
only is enabled
When digital zoom
only is enabled