Uniden UDC-7M - Manual (Page 128)

English
122
Shooting
When zooming
in or out, the
zoom
movement
stops
momentarily. The optical
zoom has
moved to the
maximum
magnification
position. Not a
malfunction.
Release the
zoom switch,
and press it
again.
46
There is noise
in the captured
image. The ISO
sensitivity
setting is too
high. Set the ISO
sensitivity to a
lower setting.
60
Monitor
No playback
image
appears. The playback
mode is not
active. Press the
playback button
[=].
26
Viewing
images
The image is
too dark. The flash was
blocked by a
finger or other
object. Hold the
camera
correctly, and
make sure the
flash is not
obstructed.
23
The subject
was too far
away. Capture the
image in the
range of
operation of the
flash.
128
Problem Cause Action
Reference
page