Uniden UDC-7M - Manual (Page 98)

English
92
4
Press the ok button.
h The screen to confirm formatting appears.
5
Select “YES”, and press the ok button.
h Formatting begins.
h During formatting, “Formatting” and “do not power off” are shown on
the monitor.
CAUTION
Caution during reformatting
i Please do not turn off the camera or insert/remove the card while the card
is being formatted.
Reformatting erases the data
i When the card or internal memory is initialized, all the recorded data is
erased. Protected data is also erased, so before reformatting a card, any
data you want to keep should be copied to your personal computer’s hard
disk or other storage medium.
Caution regarding disposing/transferring the card (recovering data from
a reformatted card)
i If a card is reformatted or the data is erased from the card using the
camera or a computer, the card’s control data may be merely modified and
the data itself may not be completely erased from the card.
i If you are disposing of a card or are transferring the card to someone else,
it is recommended that you physically destroy it, or use commercially
available software for erasing card data.
HINT
To cancel reformatting
i In step 5, select “EXIT”, and press the ok button.