Uniden uh049sx-2 - Manual (Page 17)

16
UNIDEN Model uh049sx UHF CB Radio
OPERATION
GROUP SCAN(GS) Mode
To change between OS and GS scan;
1. Press
ENT
MENU four times.
GS setting ON or OFF will flash.
2. Press or to change
the selection.
3. Press and hold
ENT
MENU to save
and exit.
To initiate scanning,
1. When
DUAL
is pressed during
Group Scan Mode, SCN will blink
and Group Scan Scanning begins.
2. To deactivate GS scanning, press
DUAL
, or .
1. If SCAN is deactivated while it is tuned to an active
channel, the uh049sx will stay on that active
channel. If none of the channels re- active, the
uh049sx will reinstate the Scan start channel.
2. If GS Scanning is initiated when there are no
channels programmed in GS memory, an error
tone will be heard and scanning will not start.
uh049sx OM.indd Sec1:16 uh049sx OM.indd Sec1:16 17/8/07 3:01:09 PM 17/8/07 3:01:09 PM