Operation, Call tone – Uniden uh049sx-2 User Manual

Page 22

Advertising
background image

21

UNIDEN Model uh049sx UHF CB Radio

OPERATION

Room Monitor can be temporarily disabled by pressing

or

.

If no further operation is performed for 45 seconds then the temporary disable mode
ends and Room Monitor mode re-activates.

1. Press

ENT

MENU

six times.

2. Press

or

to select desired setting.

The 5 Room Monitor levels are from 1 (High sensitivity) to 4 (Low sensitivity)

and

Off.

3. Press and hold

ENT

MENU

to save and exit.


• If using this feature as Baby Monitor please note it is not a

replacement for regularly checking the safety and security of

children.

• The operating time is limited to the remaining charge of the

battery and is not suitable for continuous overnight use.

• If there is any input at EXT SP MIC JACK, Room Monitor

automatically turns off.

CALL TONE

Your uh049sx radio is equipped with 5 selectable call tones that will be transmitted
when

is pressed momentarily.

1. Press

ENT

MENU

seven times. The current call tone setting flashes.

2. Press

or

to select desired setting.

The 5 call tones are C1, C2, C3, C4 and C5.

3. Press and hold

ENT

MENU

to save and exit.

Current regulations require calling tones to be restricted to one

transmission per minute. If a second transmission is attempted

within one minute then an error tone will sound.

uh049sx OM.indd Sec1:21

uh049sx OM.indd Sec1:21

17/8/07 3:01:11 PM

17/8/07 3:01:11 PM

Advertising
This manual is related to the following products: