Uniden uh049sx-2 - Manual (Page 23)

22
UNIDEN Model uh049sx UHF CB Radio
OPERATION
BUSY CHANNEL LOCKOUT
BCL is used when CTCSS or DCS is selected to prevent transmission when the
uh049sx detects a transmission from another unit using the same CTCSS or DCS
code.
1. Press
ENT
MENU
eight times. The current BCL setting flashes.
2. Press or to select desired setting.
3. Press and hold
ENT
MENU to save and exit.
ROGER BEEP
Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT and
VOX transmission.) Roger Beep can be heard through the speaker when Key Beep
is on. Roger Beep is transmitted even if Key Beep is turned off.
However, Roger Beep will not be heard from the speaker.
1. Press
ENT
MENU
nine times. The current Roger Beep setting flashes.
2. Press or to select desired setting.
3. Press and hold
ENT
MENU to save and exit.
KEY BEEP
Assures the user that the keypad has been properly pressed by emitting a beep
tone. This tone can be switched on or off.
1. Press
ENT
MENU
ten times. bP setting flashes.
2. Press or to change selection.
3. Press and hold
ENT
MENU
to save and exit.
uh049sx OM.indd Sec1:22 uh049sx OM.indd Sec1:22 17/8/07 3:01:12 PM 17/8/07 3:01:12 PM