Using the alkaline battery case – Uniden MHS550 User Manual

Page 20

Advertising
background image

Uniden MHS550 Radio Owner’s Manual

18

replacement (see back cover for contact information).
Lower the battery until it rests flat in the compartment.
Bring the battery latch up and snap it into place.

Using the alkaline battery case

The radio also comes with a battery case that holds four AAA

type alkaline batteries (not supplied). You can use alkaline

batteries as a backup for the Li-Ion battery, so you can still

use your radio while your Li-Ion battery is recharging. For

best performance, Uniden recommends using extra-strength

alkaline batteries, such as Duracell Ultra

®

batteries.

Note: When using alkaline batteries, transmit power is

limited to a maximum of 2.5 watts.

Follow the steps below to use the alkaline battery case:

Hold the lower part of the

case in one hand with the

three battery contacts facing

down. Use your thumb to

hold the notch on the lower

part of the case.
With your other hand, grip

the upper part of the case

and lift the cover open.
Align the batteries’ positive

and negative terminals with

the drawing in the case, and

snap each battery into place.
Insert the two hooks on

the lower part of the case

into the notches on the

cover, and close the cover.

(The cover fits snugly but

you should not have to force

it closed.)

Note: Each time you open

3.
4.

1.

2.

3.

4.

Thumb

notch

Thumb

notch

Rubber

seal

Rubber

seal

Advertising