Uniden MHS550 - Manual (Page 34)

Uniden MHS550 Radio Owner’s Manual 32
Note: Privacy codes are specific to each channel.
Make sure the person you want to communicate with
has the same code set on the same channel you do.
Open the FRS menu. Select CODE and press ENTER .
The current FRS channel
is highlighted. Use the
CHANNEL UP or
CHANNEL DOWN button
to select a different
channel. Any channel
that has a privacy code
enabled has an asterisk
in the display.
Choose On to enable a
privacy code on this
channel or choose Off to
disable a previously-set
code.
Enter a code number
between 001 and 142.
Use the CHANNEL UP
and CHANNEL DOWN
buttons to change the
first digit; the CHANNEL
UP button increases the
number; the CHANNEL
DOWN button decreases
the number.
When the first digit is correct, press the
ENTER button
to move to the next digit. Enter the remaining two
digits of the code in the same way.
Note: If you try to enter a code number less than 001
or greater than 142, an error tone sounds.
1.
2.
3.
4.
5.
Channel 11 *
Channel 09
FRS CTCSS
Channel 10
Channel 11 *
Channel 09
FRS CTCSS
Channel 10
Exit
On
CHANNEL 10-OFF
Off
Exit
On
CHANNEL 10-OFF
Off
press the enter key
the character then
arrow keys to select
Press the UP or DOWN
0
press the enter key
the character then
arrow keys to select
Press the UP or DOWN
0