Uniden DXAI5688 - Manual (Page 14)

3
Register.Handsets.to.the.Main.Base.before.Using!
Each handset will need to be registered to the main base unit before use. Whichever handset you choose to charge
in the base unit will automatically register to the base unit. The handset charging in the extra charging cradle MUST
also be registered to the base unit before use.
To register the extra handset(s):
) Be sure all handsets are fully charged.
2) Pick up the handset from the charging cradle, and place it in the base unit. The charge/in.use LED light on the
base unit will begin to flash, indicating that the registration is taking place.
3) Wait for at least five seconds, then pick up the handset from the base unit.
4) Repeat steps 2 - 3 for the rest of the handsets if you have.
5) Press [talk/flash] on one handset. If TALK appears on the display, the handset is registered, press [end].
Then try with all other handsets. If each handset displays TALK, the handset has been registered to the base.
Otherwise, return to step  and try again.
6) Once all handsets are registered, it doesn’t matter which handset is placed in the base unit or the charging
cradle.
Note:.
•..When.you.charge.the.handsets,.Caller.ID.summary.screen.and.the.name.of.
the.handset.appears..Following.display.is.the.example.of.handset.No.1.(HS1).
•. The.charging.cradle.can.be.used.to.charge.any.handset.
HS1
Total:00
HS1
Total:00