Uniden DXAI5688 - Manual (Page 22)

2
If.you.make.a.mistake.while.entering.a.name
Use [ /tone/ ] or [#/ ] to move the cursor to the incorrect character.
Press [delete/transfer] to erase the wrong character. Then enter the correct character. To delete all characters,
press and hold [delete/transfer].
5) STORE NUMBER is displayed. The cursor flashes indicating that the phone is ready for
the number to be entered.
6) Use the keypad to enter the phone number; each number can be up to twenty digits. If
you need the phone to pause during the dialing sequence, press [redial/pause] to insert
a two-second pause between the numbers. You can enter multiple pauses to increase the
delay. Each pause counts as a digit. The display shows a P for every pause.
7) Press [mem]. You will hear a confirmation tone, and the following screen appears.
Memory storage is complete.
8) After about two seconds, the following screen displays all the speed dial memory entries.
9) Press [end] to exit memory setup mode. The phone returns to standby.
Note:.When.storing.numbers.into.memory,.if.the.handset.is.idle.(i.e.,.no.key.is.pressed).for.more.
than.30.seconds,.it.will.beep.rapidly,.and.the.phone.will.return.to.standby.