Uniden DXAI5688 - Manual (Page 25)

24
2) Enter the number ( [0] – [9] ), or press [ ] or [ ] to select the speed dial number you would like to dial.
3) Press [talk/flash]. CONNECTING changes to TALK, and the volume setting and the
number selected appear on the display. Then the displayed number is dialed.
Note: You can also press [talk/flash] before you access the speed dial memory.
When you come to the phone number you want to dial, press [select/channel].
To.cancel.speed.dialing
Press [end] to return to standby. If accessing the list during an active call, you can press [mem] to exit the list
immediately. If no key is pressed for 30 seconds, the handset will exit the speed dial list automatically.
Note: Pressing [end] to exit the speed dial list during a call will disconnect the call immediately.
Making.a.Call.from.the.Caller.ID.List
You can place a call directly from the Caller ID list.
) With the phone in standby, press [cid/menu]. Use [ ] or [ ] to select the phone number
that you want to dial.
2) To have the phone dial a "" before the displayed Caller ID number, press [1]. To have the
phone dial the stored area code before the displayed Caller ID number, press [3].
3) Press [talk/flash]. The displayed phone number dials automatically.
Note:.
• You can also press [talk/flash] before you access the Caller ID list. When you come to the phone
number you want to dial, press [select/channel].
•..You.cannot.make.a.call.from.the.Caller.ID.list.if.your.cordless.telephone.is.connected.to.a.private.
branch.exchange.(PBX).