Ultra electronic ID Card Printer - Manual (Page 22)

IDX380 Printer Driver Manual Page 22 of 42
Printer Control
This options are useful to control the order of flipping of the card in the print process as well as
“save mode printing”.
Print Back First
Forces the printer to print the back side of a card first than flip the card and print the front side. This
ensures that the front side of the card leaves the printer face-up. The option is useful when an
Inline Laminator is connected to the printer and only the front-side of the card should be laminated.
Flip After Magnetic Encoding
Forces the printer to print the magnetic stripe side of a card first than flip the card and print the
front side. This ensures that the front side of the card leaves the printer face-up. The option is
useful when an Inline Laminator is connected to the printer and only the front-side of the card
should be laminated.
The process of printing a card with magnetic stripe encoding is as follows:
1. Card is loaded and magnetic stripe is encoded
2. After encoding the card is flipped and the opposite side to the magnetic stripe is printed.