Ultra electronic ID Card Printer User Manual
Page 36
Advertising
IDX380 Printer Driver Manual
Page 36 of 42
Retransfer
•
Media Film Type:
Standard
•
Temperature Level:
from "-5" (Low) to "+4" (High)
•
Speed (Front Side):
from "-2" (Low) to "+2" (High)
•
Speed (Back Side):
from "-2" (Low) to "+2" (High)
Please refer to chapter "Retransfer mode setting" of the printer manual for detailed
description of the parameters.
Bend Remedy
•
"Off" or "On"
•
If "On“:
Temperature Level: from "-5" (Low) to "+4" (High)
Speed:
from "-2" (Low) to "+2" (High)
Cooling Time (sec):
from "none" to "15"
Please refer to chapter "Setting the bend remedy mode" of the printer manual for detailed
description of the parameters.
Advertising