Ultra electronic ID Card Printer User Manual
Page 37
IDX380 Printer Driver Manual
Page 37 of 42
Card Size
a) "Normal"
b) "Cybernetic"
Please refer to chapter "Card size setting mode " of the printer manual for detailed
description of the parameters.
Buzzer
a) "On"
b) "Off"
Please refer to chapter "Buzzer mode setting " of the printer manual for detailed
description of the parameters.
Color Ink
•
Ink Ribbon Type :
YMCK (Type1)
•
Resin Bk Level:
from "-3" (Thin) to "+3" (Thick)
•
Resin Bk Mode :
"Normal" or "Fine"
Please refer to chapter "Ink mode setting" of the printer manual for detailed description of
the parameters.
Special Ink
•
A0 Level :
from "-3" (Thin) to "+3" (Thick)
•
A1 Level :
from "-3" (Thin) to "+3" (Thick)
These settings are reserved for future use only.
MG
•
ISO Type :
"Hi-Co" or "Lo-Co"
Please refer to chapter "Antimagnetic setting mode" of the printer manual for detailed
description of the parameters.
Power Saving