Vizio VBR100 - Manual (Page 24)

VIZIO VBR100 User Manual
Display Menu
1. Press the SETUP button on the
remote control.
2. Press ! or " to select Settings.
3. Press ! or " on the remote
control to select Display.
4. Press # to move to the list of
options.
5. Press ! or " to highlight an option,
and then press #.
6. Press ! or " to make your
selection and then press SELECT.
7. Press RETURN once to return to
the sub-menu OR press SETUP to exit the Settings menu.
HDMI Status
This option shows you if an HDMI device is connected or not. This is not a setting that you adjust. It is for
information only.
HDMI preferred Format
This option displays the best HDMI performance the HDTV is capable of producing. This is not a setting
that you adjust. It is for information only.
TV Type
Select NTSC for TVs purchased in North America. Select PAL for TVs purchased in other parts of the
world such as Europe or Japan.
Resolution
Select the video output resolution option that best fits the type of TV you have connected to your player:
! HDMI Auto—Automatically sets the resolution if the TV is connected to the HDMI jack
! 1080p—Select if the TV is a HDTV that can display 1080p (any frame rate) and is connected to
the HDMI jack
! 1080i—Select if the TV is a HDTV capable of 1080i only
! 720p—Select if the TV is a HDTV capable of 720p only
! 480p—Select if the TV is an EDTV (enhanced-definition TV)
! 480i—Select if the TV is standard definition NTSC TV
Note:
! Only the HDMI jack supports 1080p video output at any frame rate.
! The component jacks are limited to 1080i.
! The composite jacks are limited to 480i.
24
www.VIZIO.com