Vizio VBR100 User Manual

Page 35

Advertising
background image

VIZIO VBR100 User Manual

Video Problems

Solution

Video is not in high-definition.

!

Connect the TV using HDMI or Component video. Composite video cannot
output in high-definition.

!

If you have connected the TV to the HDMI or component video jacks, make
sure that you have selected the correct resolution in the setup menu.

!

Almost all commercial DVDs (but not Blu-ray discs) limit component video
resolution to 480p. Upscaling of commercial DVD content is only possible over
HDMI.

!

Your TV is not capable of displaying HD video. Consult your TV documentation.

Video pauses momentarily.

!

This occurs normally between play list chapters or scenes.

!

Video momentarily pauses when your player switches between layers on a
dual-layer disc.

4:3 aspect ratio picture

expands left and right or

screen size is incorrect.

!

Use the TV to change the aspect ratio. See the documentation that came with
the TV.

!

If the TV is connected to the component video jacks, set TV Aspect to 4:3 Pan
& Scan.

!

If the TV is connected to HDMI, set the TV Aspect to 16:9.

The screen is black.

!

Make sure the power is ON.

!

Press the input or source button on the TV remote control to select the input
source for your player.

!

Check the connections of external devices that may be connected.

!

Make sure that the disc is not dirty or defective.

!

Press

, wait five seconds, and then press

again to reset your player.

PIP does not work with a

Blu-ray Disc.

!

Make sure that the Blu-ray disc allows PIP. See the documentation that came
with the disc.

Cannot change the viewing

angle.

!

Not all discs or scenes are recorded with multiple viewing angles.

Power is ON but there is no

image on the screen.

!

Check the connections of external devices that may be connected.

!

Adjust brightness, contrast, or backlight on the TV.

!

Press the input or source button on the TV remote control to select the input
source for your player.

The picture is distorted. ! Press , wait five seconds, and then press again.

!

Check the video cables to make sure they are securely connected.

Version 8/19/2009

35

www.VIZIO.com

Advertising