VIPowER Portable External Enclosure VP-9258(T) - Manual (Page 16)

VP-9258(T) USER MANUAL 16
5-2 Windows Me/2000/XP
Step1:
If you are plugging the USB External Drive into your computer for
the first time, the system will detect a USB 2.0 Storage Device and
install the [USB Mass Storage Device] driver from system files
automatically.
Step2:
After the system installs the USB mass storage device driver,
double click on [MyComputer]. A new drive [Usbdisk] icon should
have been added. It is the USB 2.0 External Drive which just
installed.
Notes:
¡´ ¡´ ¡´ ¡´ ¡´
This USB 2.0 External Drive is supported by the Mass
Storage Device Driver in Windows Me/2000/XP operating
systems. You do not need to install any drivers.
¡´ ¡´ ¡´ ¡´ ¡´
If the new drive does not appear in [My Computer], it
means this USB 2.0 External Drive is a brand new hard disk
drive which does not contain a partition. Please refer to
Chapter 7 “Partitioning an External USB 2.0 Hard Disk” to
prepare your USB 2.0 External Disk.