VIPowER Portable External Enclosure VP-9258(T) - Manual (Page 18)

VP-9258(T) USER MANUAL 18
Step5:
You should see the external Hard Disk you just added. Highlight
the external Hard Disk and choose [Properties], select [Settings].
Set the external Hard Disk to [Removable].
Step6:
After restarting the system, a removable HDD is added to [My
Computer]. Choose the removable HDD and right click button of
mouse. Select [Format] to format your external Hard Disk Drive.
You can only set the external Hard Disk Drive to one partition
using this method.
Step7:
USB 2.0 External Enclosure VP-9258(T) is ready for use
immediately.
6-2 Disconnect the USB 2.0 External Enclosure VP-9258(T) from
Computer
6-2.1 Windows 98:
Step1:
Double click the green Unplug or Eject hardware icon in system
tray and click the drive that you want to remove and click on
[STOP].
Step2:
When the system prompts ‘Confirm device to be stopped’, click
[OK]. When the green arrow icon disappears, you may safely
unplug the USB cable from the USB port of computer.