VIPowER Portable External Enclosure VP-9258(T) - Manual (Page 8)

VP-9258(T) USER MANUAL 8
4-2 Assembly
1. Remove the two retaining screws securing the upper case of
the Enclosure to the rear face.
2. Carefully lift the rear of the case. Then, slide it away from the
rear face of the front panel.
3. Remove the four screws retaining the hard drive cradle to the
base unit of the Enclosure.
4. Hardware Installation
4-1 System Requirements
Hardware
Notebook or desktop computer with support for USB or USB 2.0.
Operating System
Windows 98SE/Me/2000/XP, and Mac OS 9.X or above.