VIPowER Portable External Enclosure VP-9258(T) - Manual (Page 20)

VP-9258(T) USER MANUAL 20
7. Partitioning the External USB 2.0 Hard Disk
7-1 Partition Under Windows 98/ME
Boot-up the computer into Windows 98/ME. Next, connect your
USB 2.0 Hard Disk Drive to the USB port.
Step1:
Go into MS-DOS mode by clicking on [Start], then choose the
[MS-DOS Prompt] in [Programs].
Step2:
At the DOS prompt, type [FDISK] and press Enter.
Step3:
If FDISK quits without any message, go back to the Windows 98
screen, disconnect the USB 2.0 Hard Disk and re-boot the
computer. Reconnect the USB 2.0 HDD and go back to Step 1 to
proceed.
Step4:
For the first screen of FDISK, answer the question:
Do you want to enable large disk support?
[Y] if you want to build a partition larger than 2GB.
[N] if you want to build a partition small than 2GB.