VBrick Systems VB5000 - Manual (Page 79)

Status
VBrick MPEG-2 Appliance Admin Guide 71
General
Network
Status: Hard Drive Status > Recorder
Pump State Stopped
Running
Fast Forward Fast
Fast Forward Slow
Paused
Rewind Fast
Rewind Slow
Hard Drive Failed
No Batch File Hard Drive
Unformatted
File Not Found
File Cannot Be Opened
Invalid File
Failed To Get Length
Failed To Get Bit Rate
Error Sending Message
Pump Bit Rate The bit rate, in bits per second, of the stream being pumped.
Pump Duration The duration, in seconds, of the stream being pumped.
Current File Name of the file currently being transferred.
Transmit State Displays whether the pump is transmitting or not transmitting.
IP Bytes
Transferred The number of transmit bytes of the UDP packets sent to the primary
destination.
Buffer Full Count The number of times the hard drive memory buffer has filled to
capacity. It can occur when the hard drive is fragmented or almost full,
or when the stream rate being recorded is excessive.
IP Packets Sent The number of UDP packets sent to the primary destination.