Veo Observer - Manual (Page 49)

Page 49 of 65
4. Select Other. Enter the name of the camera.
5. Trigger: 80
6. Incoming Ports: 1600
7. Click Add to save the settings.
Veo Observer as a DMZ Server
1. Click on the Firewall button.
2. Select Redirect Request to Virtual DMZ Host.
3. Enter the IP address for the camera in the field labeled IP Address for DMZ .
4. Click Apply.
The Veo Observer should now be configured to work with your network and be accessible to the Internet.
NETGEAR Cable/DSL Router Gateway RP614
The NETGEAR Cable/DSL Router Gateway RP614 setup program is web-based, which means that it is
accessed through your web browser. To use the Setup Wizard:
1. Start a web browser on the computer connected to the router.
2. In the Address or Location box, type http://192.168.0.1 and press Enter.
3. In the User Name box, type admin
4. In the Password box, type password, click OK.