Veo Observer - Manual (Page 51)

Page 51 of 65
Veo Observer as a DMZ Server
1. On the Main menu in the Advanced
section click on Security.
2. Click Default DMZ Server.
3. Type the IP address for the camera.
4. Click Apply.
The Veo Observer should now be configured to work with your network and be accessible to the Internet.
SMC Barricade Broadband Router SMC7004VBR
The SMC Barricade Broadband Router SMC7004VBR setup program is web-based, which means that it is
accessed through your web browser. To use the Setup Wizard:
1. To access the Barricade’s management interface, enter the IP address of the Barricade in your web browser
http://192.168.2.1
2. Click Advanced Setup.
3. Click Status. Under DHCP Client Log determine the IP address assigned to the camera.
4. Click on LAN.
For DHCP Server click Enabled.
For Lease Time select Forever.
Click Apply.