Vivotek IZ7151 - Manual (Page 104)

VIVOTEK
104 - User's Manual
Camera Control
Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/viewer/camctrl.cgi?[channel=<value>][&camid=<value>][&move=<value
>][&focus=<value>][&speedpan=<value>][&speedtilt=<value>][&speedzoom=<value>]
[&speedfocus=<value>][&auto=<value>][&zoom=<value>][&speedlink=<value>] [&return=<return
page>]
PARAMETER VALUE DESCRIPTION
channel <0~(n-1)> Channel of video source.
camid 0,<positive integer> Camera ID.
home Move to camera to home position.
up Move camera up.
down Move camera down.
left Move camera left.
move
right Move camera right.
speedpan -5 ~ 5 Set the pan speed.
speedtilt -5 ~ 5 Set the tilt speed.
speedzoom -3 ~ 3 Set the zoom speed.
speedfocus -3 ~ 3 Set the focus speed.
pan Auto pan.
patrol Auto patrol.
auto
stop Stop camera.
wide Zoom larger view with current speed. zoom
tele Zoom further with current speed.
auto Auto focus.
far Focus on further distance.
focus
near Focus on closer distance.
speedlink 0 ~ 4 Issue speed link command.
return <return page> Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or relative
path according to the current path. If you omit this parameter, it
will redirect to an empty page.