Camera control – Vivotek IZ7151 User Manual
Page 52
VIVOTEK
52 - User's Manual
Camera Control
This section explains how to control the Network Camera's Pan/Tilt operation by connecting with a
PTZ scanner�
RS-485 Settings
Enable PTZ Operation
:
Select this option to enable PTZ operation�
To utilize this feature, please connect the Network Camera with a PTZ scanner via RS485 interface
first� VIVOTEK offers three PTZ drivers: DynaDome/SmartDOME, Lilin PIH-7x00 and Pelco D
protocol� If none of the above PTZ drivers is supported by your PTZ scanner, please select Custom
camera�
1
:
Refer to your PTZ scanner, set the Camera ID, PTZ driver, Port settings�
2
:
Select Enable PTZ Operation and then click Save to take effect�
3
:
The PTZ control buttons will be displayed in the main page�
PTZ control buttons
Pan / Tilt speed
Preset position
PTZ control buttons
:
▲
:
Move the Network Camera up�
▼
:
Move the Network Camera down�
◄
:
Move the Network Camera left�
►
:
Move the Network Camera right�