Vivotek IZ7151 - Manual (Page 56)

VIVOTEK
56 - User's Manual
Application
This section explains how to configure the Network Camera to react in response to particular
situations� A typical application is that when a motion is detected, the Network Camera sends
buffered images to a FTP server or via e-mail as notifications�
ex.
Motion detection,
Periodically, Digital input,
System reboot
Event Condition
ex.
Snapshot, Video Clips
ex.
Email, FTP
Media
(what to send)
Server
(where to send)
Action
In the illustration above, an event can be triggered by many sources, such as motion detection or
external digital input devices� When an event is triggered, you can specify what kind of action will
be performed� You can configure the Network Camera to send snapshots or videos to your email
address or FTP site�
To start plotting an event, it is suggested to configure server and media columns first so that the
Network Camera will know what action shall be performed when a trigger is activated�
Media Settings
In the Media column, click Add to open the media setting page� In this page, you can specify what
kind of media to send when a trigger is activated� A total of five media settings can be configured�
Media name : Enter a descriptive name for the media setting�
Media Type : There are three choices of media types available: