Vision Fitness X6000 - Manual (Page 31)

27
GENERAL
TROUBLESHOOTING YOUR ELLIPTICAL TRAINER
Our Elliptical Trainers are designed to be reliable and easy to use. If,
however, you have a problem, these troubleshooting steps may indicate
the cause.
PROBLEM: The Console does not light up (Models X6000 & X6000DA
only).
SOLUTION: Batteries are too weak; replace them.
PROBLEM: The Elliptical Trainer appears to work but there is no resistance
change.
SOLUTION: The magnetic brake assembly is not working properly; please
contact your retailer.
PROBLEM: The Elliptical Trainer makes a squeaking or creaking noise.
SOLUTION (All models): Check and tighten all the bolts on the Elliptical
Trainer again.
SOLUTION (Dual-Action models only): Lubricate the bushings in the Dual-
Action link arms.
NOTE:
If the above steps do not remedy the problem, discontinue use, turn
the power off and contact your retailer.