VXI TECHNOLOGY SVM2608 - Manual (Page 49)

www.vxitech.com
SVM2608 Programming 49
Diagnostic Commands
The following commands in combination with the Self-Test command (see measurement
commands section above) help diagnose problems with the board.
0x3000 Read the self-test register.
0x3001 Read the self-test relay register.
0x3002 Read the switch register.
0x3003 Read the trigger inputs.
0x3004 Read the calibrated reference value: 0.945 V.
0x3005 Read the calibrated reference value: -0.945 V.
0x3006 Read the calibrated reference value: 9.45 V.
0x3007 Read the calibrated reference value: -9.45 V.
0x3008 Read the calibrated reference value: 128 Ω.
0x3009 Read the calibrated reference value: 81.92 kΩ.
0x300A Read self-test measurement values.
0x300B Turn SYSFAIL ON (for diagnostic purposes only).
0x300C Turn SYSFAIL OFF (just for diagnostic purposes).
0x300D Read the calibrated reference value: 0.1177 V.
0x300E
Read the calibrated reference value: -0.1177 V.
0x300F Unused.
0x3010
Control the HS self-test relays – all OFF.
0x3011 Turn Channel 4 self-test on (Channel 5 OFF).
0x3012 Turn Channel 5 self-test on (Channel 4 OFF).
0x3013 Turn Channel 4 and Channel 5 self-test on (not normal).