Verilux ClearWave CWST2RB - Manual (Page 11)

11
Note:
• To receive the optimal dosage during a care cycle, fully charge the
ClearWave ® Soothing Skin System before use. A fully discharged
device can require up to 12 hours of charging.
• When the bottom Battery Life Indicator Light is
fl ashing and the Information Display is displaying
“LO”, the battery is low.
• Device can be used in charging mode if connected
directly to the power adapter.
Charging Mode
To Charge Using Charging Stand:
Step 1: Connect the power adapter to the Charging
Stand and plug into a 110V grounded
electrical outlet.
Step 2: Place the device on the Charging Stand,
as shown.
Step 3: The Battery Life Indicator Lights will
provide information to you on the status
while charging.
Step 4: When all three Battery Life Indicator Lights
are illuminated (as shown), the battery is fully
charged and the device is ready for use.
To Charge WITHOUT Charging Stand:
Step 1: Connect the power adapter to the device and
plug into a 110V grounded electrical outlet.
Step 2: The Battery Life Indicator Lights will provide
information to you on the status while
charging.
Step 3: When all three Battery Life Indicator Lights
are illuminated (as shown), the battery is fully
charged and the device is ready for use.