Verilux ClearWave CWST2RB - Manual (Page 7)

7
Controls and Status Information Indicators
Controls
a. Power Button
b. Head Latch Buttons
Status Indicators
c. Information Display
d. Battery Life Indicator Lights
e. Interchangeable Head Life
Indicator Lights
How to Check the Status of Your Device
• Pressing the Power Button on the device body when the device is not operating will
immediately place the device in Status Mode.
• The device will remain in Status Mode for half a second, then will automatically turn off.
• The Information Display will show the number of cycles remaining on the
Interchangeable Head before replacement is required.
• The Interchangeable Head Life Indicator and the Battery Life Indicator Lights will
display the respective status of the Interchangeable Head and battery charge level.
(See status indications table above.)
• Placing the device in the Charging Stand will also activate Status Mode.
3 lights
2 lights
1 light
Flashing light
Interchangeable Head Life Indicator Light
More than 75% of head life remaining
25% to 75% of head life is remaining
Less than 25% of head life is remaining
Head needs to be replaced
Interchangeable Head Life Indicator and Battery Life Indicator
Display
Number
Number
0
– – –
LO
HP
Mode
Operating
Idle
Idle
Information Display Indicators
Reference
Page 10
Page 13
Page 15
Page 13 or 15
Page 14 or 15
Page 12 or 15
Explanation
Time remaining on current care cycle
Number of care cycles remaining on head
Interchangeable Head is exhausted
Interchangeable Head is not correctly attached
Battery is low
Device requires cooling
b.
a.
c.
d.
e.
Battery Life Indicator Light
More than 75% of the battery is charged
25% to 75% of the battery is charged
Less than 25% of the battery is charged
Battery needs to be charged