Verilux ClearWave CWST2RB - Manual (Page 12)

12
Note: Consecutive uses and high ambient temperatures can cause the
Interchangeable Head surface to become hot. The device monitors the
Head surface temperature during each care cycle to ensure that the Head
maintains an optimum temperature. Once the device has reached the
optimum temperature limit, it will enter Heat Protection Mode and the device
will limit operation until suffi cient surface cooling has been achieved.
When the Information Display is displaying “HP”, the device has reached its
optimum temperature limit and will not continue to operate until a cool down
period has been completed.
If your device enters Heat Protection Mode:
The Information Display will display “HP” and
the device will beep 10 times and immediately
terminate the cycle.
Step 1: Set the device back on the Charging Stand
and allow cooling.
Step 2: Once “HP” is no longer visible in the Information display, the device
is ready for use.
Step 3: Resume normal operation as outlined on page 9 of this manual.
Heat Protection Mode