Pg. 133 starting and driving, Geartronic (option) – Volvo V70 User Manual

Page 149

Advertising
background image

2007 Volvo V70

Shift gate positions
You can move the gear selector freely between the (MAN)ual and (D)rive positions while driving.
Depress the button on the front of the gear selector knob to move between the R, N, D, and P positions.

Manual shifting
You can move the gear selector freely between the (MAN)ual and (D)rive positions while driving. Gears
3, 4, 5, and 6 (where applicable) have a "lock-up" function which reduces engine speed and helps save
fuel.
The currently selected gear will be displayed in the instrument panel (see

page 46

).

pg. 133 Starting and driving

Geartronic (option)

To access the (MAN)ual shifting position from (D)rive, move the gear selector to the left to MAN.

To return to the (D)rive position from MAN, move the gear selector to the right.

While driving
If you select the (MAN)ual position while driving, the gear that was being used in the (D)rive position
will also initially be selected in (MAN)ual position.

Move the gear selector forward (toward "+") to shift to a higher gear or rearward (toward "-") to shift

to a lower gear.

If you hold the gear selector toward "-", the transmission will downshift one gear and will utilize the

braking power of the engine. If the current speed is too high for using a lower gear, the downshift will
not occur until the speed has decreased enough to allow the lower gear to be used.

If you slow down to a very low speed, the transmission will automatically shift down.

When starting in the (MAN)ual position, 3rd gear is the highest gear that may be selected.

NOTE: Kickdown does not function when the transmission is in the manual shift (Geartronic) mode.

file:///K|/ownersdocs/2007/2007_V70/07v70_06.htm (18 of 41)12/30/2006 5:49:38 PM

Advertising