The engine is switched off, The gear selector is placed in (n)eutral, The wheels start to spin or lock – Volvo V70 User Manual

Page 67

Advertising
background image

2007 Volvo V70

Setting speed
Press + or - to set the current speed. CRUISE-ON will be displayed in the information window in the
instrument panel.

Increasing or decreasing speed
Use + or - in the following ways to increase or decrease the vehicle's speed:

Press and hold down + or - until the vehicle reaches the desired speed.

Press + or - for approximately a half second and release the button to increase or decrease vehicle

speed by approximately 1 mph (1.6 km/h).

NOTE: Cruise control will not function at speeds below approximately 20 mph (30 km/h).

Braking

Cruise control is automatically disengaged when the brake pedal is depressed. The currently set speed

is stored in memory.

Pressing resume

will return the vehicle to the previously set speed.

Acceleration
Momentary acceleration, such as when passing another vehicle, does not affect cruise control operation.
The vehicle will automatically return to the previously set speed when you release the accelerator pedal.

Disengaging cruise control
To disengage cruise control, press the CRUISE button. CRUISE or CRUISE-ON will no longer be
displayed in the information window in the instrument panel.

NOTE: Cruise control is automatically disengaged if:

the engine is switched off

the gear selector is placed in (N)eutral

the wheels start to spin or lock

if an increase in speed is maintained for more than one minute

file:///K|/ownersdocs/2007/2007_V70/07v70_02.htm (23 of 35)12/30/2006 5:49:29 PM

Advertising