Vidikron 90 - Manual (Page 19)

Controls and Functions
Vidikron Vision Model 90 Owner’s Operating Manual 2-5
1. IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2. LIGHT
Press to illuminate the buttons.
3. ON / OFF
Press to turn the projector on or off.
4. CODE
For Service use only.
5. Cursor Keys ( , , , )
Use these buttons to select items or settings, adjust settings or switch display patterns.
When no menus are present on-screen, the UP and DOWN buttons toggle through the
available aspect ratios, in this order:
UP Button = Anamorphic - Standard (4:3) - Letterbox - IntelliWide - Cinema
DOWN Button = Cinema - IntelliWide - Letterbox - Standard (4:3) - Anamorphic
Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this
order:
LEFT Button = DVI 2 - DVI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 - S-Video
1 - Composite
RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB
2 - DVI 1 - DVI 2
6. ENTER
Press to select a highlighted menu item or confirm a changed setting.
7. MENU
Press this button to access the OSD controls, or to exit the current menu and return to
the previous one.
Memory Preset Buttons:
8. ISF NT (Night)
Press to recall settings for the current input from the “ISF Night” memory preset.
9. ISF DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
10. CUST 1
Press to recall settings for the current input from the “Custom 1” memory preset.
11. CUST 2
Press to recall settings for the current input from the “Custom 2” memory preset.