Vidikron 90 - Manual (Page 50)

Maintenance and Troubleshooting
5-2 Vidikron Vision Model 90 Owner’s Operating Manual
Colors in the image are
swapped; for example, reds
appear blue or vice versa. • The Red/Pr, Green/Y or
Blue/Pb outputs from the
source are connected to the
wrong inputs on the Vision
90. • Ensure that the source
outputs are connected to
the correct Vision 90 input.
The projector will not turn
back on after it was powered
down, or the image disappears
during operation. • The projector will not turn
on for two minutes after
power-down, to protect the
lamp.
• The lamp has failed.
• Wait two minutes until the
LED at the front of the
Vision 90 turns red.
Table 5-1. Troubleshooting Chart (continued)
Symptom Possible Cause(s) Solution