4 connections to the vision 90, Connector panel access, Connecting the vision 90 to source components – Vidikron 90 User Manual
Page 30: Dvi connections, Figure 3-7 . dvi source connections, Connections to the vision 90 -10, Connector panel access -10, Connecting the vision 90 to source components -10, 7. dvi source connections -10
Vidikron Vision Model 90 Owner’s Operating Manual
3.4
Connections to the Vision
90
Proceed as follows to connect the Vision 90 to your video sources, external controller(s) -- if
present -- and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on connectors
that have them.
Connector Panel Access
To access the connector panel, press the
large, black door release button so it pops
out. Then, turn the knob clockwise or
counter-clockwise and pull gently on it to
open the door.
Connecting the Vision 90 to
Source Components
Connect your video sources to the Vision 90 as shown and described in the sections that
follow.
DVI Connections: See Figure 3-7.
Figure 3-7. DVI Source Connections
➤
➤
Use the DVI inputs whenever possible. This ensures the highest video
quality because the signal is carried in the digital domain throughout the
entire signal path, from source component output into the projector.
Tip
DVI 1
DVI 1
HD1
HD2
Y
G
G
Y
H
V
INPUTS
H
V
HD1
HD2
INPUTS
R
Pr
Pr
R
B
Pb
Pb
B
DVI 2
DVI 2
COMPONENT VIDEO
Pb
Pr
Y
COMPONENT VIDEO
Y
Pr
Pb
VIDEO
VIDEO
S-VIDEO 2
S-VIDEO 2
S-VIDEO 1
S-VIDEO 1
RS-232
CONTROL
RS-232
CONTROL
IR
IR
1
2
3
1
2
3
TRIGGERS
TRIGGERS
DVI Source
(DVD Player or
HD Tuner with
HDMI or DVI out)