Visioneer One Touch 9420 - Manual (Page 120)

S ELECTING N EW S ETTINGS FOR A B UTTON 113
S
CANNING WITH
E
VENT
F
ORWARDING
You use event forwarding to specify another application to use for
scanning before you start. A typical example is if you want to use
another application’s interface to select scanning options before you start
scanning. When you press the scanner button designated for event
forwarding, the scanner waits to start scanning until you select the
application to use. After you select the application, its interface opens
and you use it to continue scanning.
To scan with event forwarding:
1. Open the OneTouch Properties window.
2. Click the tab of the button you want to use for event forwarding.
3. Select Still Image Client as the Destination Application.
Note that you cannot choose a page format for this option because
the actual Destination Application is not selected until after you
press the scanner button.
4. Choose a Scan Configuration.