Visioneer One Touch 9420 - Manual (Page 42)

S CANNING F ROM THE TWAIN I NTERFACE 35
The Folders pane (which shows folders for organizing your scanned
images) is replaced by the Scan pane.
3. Click the Scanner drop-down arrow, and select TWAIN: Visioneer
9420 from the drop-down list.
Note: Please wait a few moments for your selection from the drop-
down list to become active. This delay only occurs the first time you
select from the list while PaperPort initializes the scanner. Later on,
selecting from the list activates immediately.
Note: If the Scan button at the bottom of the panel is not available
when you make a selection from the Scanner drop-down list, then
your scanner needs to be setup to work with PaperPort. See the
section “Setting Up Your Scanner to Work With PaperPort” on
page 37.
Scan pane.
If this Scan button is not active, see the section on page 37 to
set up your scanner to work with PaperPort.
Click the arrow to see
the list of scanners.