Visioneer One Touch 9420 - Manual (Page 70)

S CANNING 35 MM S LIDES AND N EGATIVES 63
P
OSITIONING A
35
MM
N
EGATIVE
F
ILM
S
TRIP
1. Slide the filmstrip into the 35mm negative mask and center the
frame you want to scan in the opening.
2. Place the mask on the glass so the arrow on the mask labeled Use
this mask for scanning 35mm negatives is aligned with the arrow
in the upper left corner of the scanner.
The 35mm negative holder also has a calibration slot next to it. Do
not place items to be scanned in the calibration slot.
3. Close the lid. You’re now ready to start scanning the negatives.
4. See “Scanning 35mm Slides or Negatives from the TWAIN
Interface” on page 64 to start the scanning.