MAXWELL MW-3003 VT - Manual (Page 3)

3
ENGLISH
3
STEAM IRON
DESCRIPTION
1. Water spray nozzle
2. Water tank lid
3. Steam supply regulator
4. Spray button
5. Additional steam release button
6. Handle
7. Power cord protection
8. Base
9. Heating element on/off indication
10. Water tank
11. Temperature regulator
12. Maximal water level indication
13. Iron sole
SAFETY MEASURES
Before using the unit, please read
the instructions carefully and pay
attention to the illustrations.
•
Before switching on the unit, make
sure that your home electricity supply
corresponds to the voltage of current
specified on the unit.
• Power cord is equipped with a euro
plug; insert it into the socket, with se-
cure grounding.
• In order to avoid risk of fire do not use
adapters while connecting the appli-
ance to the outlet.
• In order to avoid overloading of the
power network do not switch on sev-
eral appliances with high power con-
sumption simultaneously.
• Use the unit only for the intended
purposes.
• Use the iron only on the ironing
board.
• Place the iron on a flat stable sur-
face.
• Always unplug the unit while filling the
water tank with water.
• While operating the unit, provide that
the water tank lid is firmly closed
• Close supervision is necessary when
children or infirm persons are near
the unit.
• Never leave the operating unit unat-
tended.
• Always unplug the unit if you do not
use it.
• In order to avoid electric shock do not
immerse the unit into water or other
liquids.
• Do not fill the water tank with scent-
ed liquids, vinegar, starch solution,
descaling reagents, chemical agents
etc.
• Avoid contact with hot surfaces or
outgoing steam of the iron in order to
avoid getting burns.
• Provide that the power cord is not
hanging over the edge of the ironing
board and make sure that it does not
touch heated surfaces.
• To unplug the unit always take it by
the plug, do not pull by the power
cord.
• Before taking the unit away for keep-
ing, pour out the remaining water and
let the unit cool down.
• Pour out water only after you have
unplugged the unit.
• Do not use the unit if the plug or the
power cord is damaged or if there are
other damages in the unit.
• In order to avoid electric shock do
not repair the unit yourself. If there
are some damages in the unit apply
to the authorized service center.
BEFORE USAGE
• Take out the iron from the package
and remove the protective cartoon
covering from the iron sole (13).
• Make sure that the electrical supply
voltage corresponds to the iron's op-
erating voltage.
Note:
The iron's heating element is bro-
MW-3003.indd 3 MW-3003.indd 3 26.05.2009 10:21:45 26.05.2009 10:21:45