MAXWELL MW-3003 VT - Manual (Page 6)

6
ENGLISH
the additional steam supply button
(5) with 4-5 sec. interval.
AUTO-RELEASE FUNCTION
If the iron is about 30 seconds in the
horizontal position or about 8 minutes
in the vertical position it will switch off
automatically. To switch on the iron,
just start ironing.
Note: After switching off of the iron the
preset temperature of the iron sole will be
set in some time depending on the position
of the temperature regulator (11).
CARE AND CLEANING
• Before cleaning the iron, make sure
that it is turned off and has cooled
completely.
• Wipe the iron's outer surface with a
damp cloth and then wipe dry.
• Sediment on the iron sole can be re-
moved with a cloth soaked in vinegar-
water solution.
• After removing sediment, polish the
sole with a dry cloth.
• Do not use abrasive substances to
clean the sole and body of the iron.
• Avoid touching the iron sole with
sharp metal objects.
STORAGE
•
Turn the temperature regulator (11)
anticlockwise till MIN position, set
the steam release regulator (3) to the
low position - steam release OFF po-
sition.
• Remove the power plug from the out-
let.
• Open the water tank lid (2), turn over
the iron and drain any remaining wa-
ter from the water tank (10).
• Close the lid (2).
• Set the iron vertically and allow it to
cool completely.
• Store the iron vertically.
TECHNICAL CHARACTERISTICS
Power requirements: 230 V ~ 50/60 Hz
Power consumption: 2200 W
Specifications subject to change with-
out prior notice.
MINIMUM SERVICE LIFE - 3 YEARS
GUARANTEE
Details regarding guarantee conditions
can be obtained from the dealer from
whom the appliance was purchased.
The bill of sale or receipt must be pro-
duced when making any claim under
the terms of this guarantee.
This product conforms to the
EMC-Requirements as laid down
by the Council Directive 89/336/
EEC and to the Law Voltage
Regulation (73/23 EEC)
MW-3003.indd 6 MW-3003.indd 6 26.05.2009 10:21:45 26.05.2009 10:21:45