Vantec UGT-ST310R - Manual (Page 20)

UGT-ST310R Page 20
2. Select Device Manager.
3. Double click SCSI and RAID Controller (Storage
controllers), then double click Silicon Image SiI 3114
SoftRAID 5 Controller to display driver properties. A
message this device is working properly is displayed in the
dialog box, the driver has been correctly installed.
SATA RAID 5 Management Software
Installation
For Windows® 2000/XP/Server 2003/Vista
1. Please insert the driver CD into your CD-ROM Drive.
2. At the Windows desktop click Start, then Run.
3. Type D:\ UGT-ST310R\2000_XP_2003_Vista\32bit\setup.msi , then
click OK. (Change D: to match your CD-ROM drive letter)
4. Follow the on-screen instructions to complete the
installation.
For Windows® XP-x64/Server 2003-x64/Vista-x64
1. Please insert the driver CD into your CD-ROM Drive.
2. At the Windows desktop click Start, then Run.
3. Type D:\ UGT-ST310R\XP_2003_Vista\64bit\setup.msi , then
click OK. (Change D: to match your CD-ROM drive letter)
4. Follow the on-screen instructions to complete the
installation.