Information – Vanson V-6000 User Manual
Page 18
18
Instructions on how to use the memory card
If you open the battery chamber cover when the camera power is turned on, the power
will turn off automatically.
Don’t remove the memory card when the Auto focus lamp(Green) is blinking as this may
cause damage to data in the memory card.
INFORMATION
[ SD(Secure Digital) memory card ]
Write
protect
switch
Label
Card
pins
The camera can use SD Memory Cards and MMC (Multi Media Card).
The SD memory card has a write protect switch
that prevents image files from being deleted or
formatted.
By sliding the switch to the bottom of the SD
memory card, the data will be protected. By
sliding the switch to the top of the SD memory
card, the data protection will be canceled. Slide
the switch to the top of the SD memory card
before taking a picture.
When using a 32MB SD memory card, the specified shooting capacity will be as follows.
(These figures are intended as an indication of expected performance). These figures are
approximate as image capacities can be affected by variables such as subject matter.
Mode
Quality/Size
2816
2560
2272
2048
1600
1024
640
640x480
320x240
TIFF
1
2
2
3
5
12
27
-
-
Super fine
9
11
14
17
28
64
129
-
-
Fine
18
22
28
33
53
106
202
-
-
Normal
26
32
40
49
75
139
227
-
-
30FPS
-
-
-
-
-
-
-
25SEC
97SEC
15FPS
-
-
-
-
-
-
-
45SEC
155SEC
STILL IMAGE mode
MOVIE CLIP mode