Vanson V-6000 - Manual (Page 23)

23
Starting the recording mode
How to use the MySET mode ( )
This mode allows users to save frequently used shooting settings
for later use. Steps from 1-4 are the same as those for AUTO
mode.
5. Select the MySET mode by rotating the mode dial.
6. You can use the menus that appear when you press camera
and menu buttons to change the desired camera
functions.
The last changed function(s) will automatically be saved
as MySET mode.
7. If you rotate the Mode Dial to MySET mode while in
another camera operation mode, the camera settings
will switch to the settings you changed in Step 6.
8. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
9. Press the shutter button to capture an image.
* Voice memo, self-timer, and remote controller configurations cannot be saved.
[ MySET mode ]
Steps from 1-4 are the same as those for AUTO mode.
5. Select the VOICE RECORDING mode by rotating the
mode dial.
6. Press the shutter button to record a voice.
- Press the shutter button once and voice is recorded for
as long as the available recording time(Max : 1 hour)
allows. The recording time will be displayed on the LCD
monitor. Voice will still be recorded if the shutter button is
released.
- If you wish to stop recording, press the shutter button
again.
- File type : *.wav
* A distance of 40cm between you and the camera
(microphone) is the best distance to record sound.
* The auto focus indicator lamp(Green) blinks during voice
recording.
[ VOICE RECORDING mode ]
START:SHUTTER
STANDBY
How to use the VOICE RECORDING mode ( )