Vanson V-6000 - Manual (Page 22)

22
How to use the PROGRAM mode ( )
Selecting the automatic mode will configure the camera
with optimal settings. You can still manually configure all
functions except the iris and shutter speed.
Steps from 1-4 are the same as those for AUTO mode.
5. Select the PROGRAM mode by rotating the mode dial.
6. Press the menu button to configure advanced functions
such as image size (p.48), quality (p.49), metering (p.50),
number of pictures in continuous shooting (p.50), picture
effects (p.51), sharpness (p.52).
7. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
8. Press the shutter button to capture an image.
Starting the recording mode
[ PROGRAM mode ]
How to use the A/S/M mode ( )
In this mode you can select the shutter speed or aperture
value to your preference. Steps from 1-4 are the same as
those for AUTO mode.
5. Select the A/S/M mode by rotating the mode dial.
6. Press the menu button and select the [ASM] menu tab.
7. Use the Up/Down buttons to select A (Aperture priority),
S (shutter priority), or M (Manual mode).
Press the OK button to confirm.
* Please see page 40 for details on Aperture and Shutter
speed setting
8. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
9. Press the shutter button to capture an image.
[ A/S/M mode ]