Vanson V-6000 - Manual (Page 41)

41
MF button
If the aperture value or shutter speed is out of the limit of
application, the value that is displayed on the LCD monitor
will show as red. However, you will still be able to take a
picture.
Please adjust the shutter speed and aperture value so that
the red warning turns white (normal) before taking the
picture.
+/- button
RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to
be captured.
Setting RGB Values
1. Press the +/- button, and then use the UP and DOWN
buttons to select the RGB icon ( ).
The RGB menu bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select
the desired RGB value.
- Up/Down Button: Navigates between R, G, and B
icons.
- Left/Right Button: Changes value of each icon.
3. When you press the +/- button again, the value you set
will be saved and RGB setup mode will end.
You can use the +/- button to adjust the values for the RGB, ISO, white balance, exposure
compensation and Long Time shutter speed.
Main menu Sub menu Available camera mode
RGB
Shutter speed/ Aperture value Changed by zoom scale
-2.0~0.0~+2.0(0.5EV steps) Exposure compensation
ISO
WHITE BALANCE
R (Red), G (Green), B (Blue)
AUTO, DAYLIGHT, CLOUDY, FLUORESCENT
H, FLUORESCENT L, TUNGSTEN, CUSTOM.
AUTO, 50, 100, 200, 400